MS3-MaxiSteri14, Bacti-cinerator Sterilizer, Micro incinerator
Bacti-cinerator Sterilizer uses infrared heat sterilization, because it is easy to use, simple to operate, no open flame, no fear of wind, substitute alcohol lamp, safe to use, can be widely used in the environment of biosafety cabinet, purification workbenches, suction fans and mobile vehicles, for microbiological experiments.
Based on the principle of electronic infrared, the products are widely used in the sterilization of inoculation ring sor inoculation needles, completely replacing alcohol lamps.
The temperature inside the heating hole can reach 800°C or above, sterilization takes only 5-7 seconds and sterilization is through. The product can be used in an anaerobic chamber.
Small volume, light weight, appearance and easy to clean. Heating body can adjust angle, easy operation.
Organic substances in the ceramic funnel pipe depths ashing prevent infectious spatter and cross contamination.
Specification |
MS3-MaxiSteri14 |
Center Max. temp. |
825°C±50°C |
Low Level Temp. |
480°C |
Heating Speed |
20min (to max. temp.) |
Max. Sterilize Diameter |
ɸ14mm |
Heating Element Lenght |
140mm |
Adjustable Angle |
75° - 120° |
Voltage |
AC 220V 50/60Hz |
Power |
230W |
Fuse |
250V, 2A/3A, ɸ5x20 |
Dimension |
W.87 x D.151 x H.160mm |
Net Weight |
1kgs |
!DOCTYPE>